Are you looking for something specific?

Contact Us
Get Quote

Champion Air Treatment Solutions

Aspiresolution > Champion Air Treatment Solutions

Home › Champion Airtech › Champion Air Treatment Solutions

Champion Air Treatment Solutions
Authorised partner of Champion Airtech

Champion Air Treatment Solutions

  • Coverage: Filtration, drying, condensate management
  • Filter Grades: Particulate, coalescing, oil-vapour (carbon)
  • Dryer Types: Refrigerated (CHR) + desiccant for dewpoint <-40 °C
  • Quality Standards: ISO 8573-1 Class compliant

End-to-end compressed-air treatment line — coalescing and particulate filters, refrigerated and desiccant dryers, electronic condensate drains, and oil-water separators — matched to your compressor output for clean, dry, oil-free air at the point of use.

Get a Quote WhatsApp Call Us

Authorised channel partner · Direct quote within 24 hours

Key Features

  • Full ISO 8573-1 air-quality classes covered — particulate, water, oil
  • Modular installation: drop-in line components with standard NPT/flange connections
  • Coalescing filters with grade 0.01 micron at 99.99% efficiency
  • Activated-carbon filters for total oil-vapour removal in critical applications
  • Electronic no-loss condensate drains — zero compressed-air loss vs timer drains
  • Oil-water separators meeting environmental compliance for condensate discharge

Specifications

Filtration GradesParticulate (5 μm / 1 μm / 0.1 μm / 0.01 μm)
Refrigerated DryersCHR series, +3 °C dewpoint
Desiccant DryersHeatless & heated regenerated, dewpoint to -70 °C
DrainsElectronic no-loss, timer-fail safe
Oil-Water SeparatorsMulti-stage with replaceable cartridges
Connection Sizes1/4″ up to 3″ standard
Working PressureUp to 16 bar standard, HP versions available
ComplianceISO 8573-1 air quality classes

Applications & Industries

PharmaceuticalsFood & BeverageElectronics & SemiconductorPainting & Surface FinishingAutomotive AssemblyInstrumentation AirHospitals & HealthcareLaboratories

Frequently Asked Questions

Yes — raw compressed air contains moisture, oil aerosol, and particulates. Without treatment these contaminate products (paint defects, food recalls), damage pneumatic tools, and clog instrumentation. ISO 8573-1 defines the required cleanliness class for each application.
Painting and general manufacturing: typically Class 1.4.2 (1 μm, +3 °C dewpoint, 0.1 mg/m³ oil). Food & pharma: Class 1.2.1 with desiccant drying. Send us your application via Get a Quote and we’ll recommend the package.
Refrigerated dryers (CHR) give +3 °C pressure dewpoint — suits 80% of industrial applications. For low temperature ambient or strict moisture limits (pharma, instrumentation, outdoor pipes in winter), desiccant dryers deliver -40 °C or -70 °C dewpoint.
Timer drains open on a schedule and lose compressed air every cycle — typically 2–4% of your compressor output is wasted. Electronic no-loss drains sense actual condensate level and dump only when needed, paying back the upgrade in months.

Send us a quick enquiry

Tell us your application, line size, pressure, fluid and quantity. We’ll respond with a sized quotation within 24 hours.

Or reach us directly:
 +91 99589 28056  |   WhatsApp  |   enquiry@aspiresolution.in



    We typically respond within 24 hours. Your details stay with Aspire Solution.

    After-sales support

    We service this product + supply genuine spare parts

    Champion AMC contracts, breakdown response, and OEM-genuine spares from the same team that sold it to you.

    Ready to get a quote?

    Authorised channel partner · Genuine spares · Direct quote within 24 hours
    Tell us your application and we’ll send you a quote within 24 hours.

    Get a Quote WhatsApp Now Call +91 99589 28056